Reaction mixer  

The machine has grid teeth, grid gear shafts, chain plates, etc. to form a grid to replace the traditional grid. The grid rotates in the frame to intercept and continuously separate the suspended matter in the sewage. Therefore, the work efficiency is high, the operation is stable, the water level difference between the front and rear of the grid is small, and it is not easy to be blocked. This machine is suitable for use as a coarse and fine grid. The grid teeth in the grid can be made of engineering plastics or stainless steel. The grid gear shaft and chain plates are made of stainless steel, which greatly improves the corrosion resistance of the grid as a whole. Stainless steel grid teeth are generally suitable for grids with smaller gaps. The operation of the equipment causes the rake teeth to bring the debris trapped on the grid surface from bottom to top to the slag outlet. When the rake teeth move from top to bottom, the debris falls off by gravity and falls into the conveyor from the discharge port. Or in a garbage trolley, and then transported out or for further processing.

main feature:

1. Low noise, compact structure and stable operation.

2. The frame is an integral frame structure with strong rigidity, easy installation and less daily maintenance work.

3. The equipment is easy to operate, and the operation of the equipment can be directly controlled locally or remotely.

Parameter range: 800~2000mm, grid gap: 10~50mm, installation angle of 60~75°